Ultrasonic Diffuser for Essential Oils Obelisk - Physalis
DESCRIPTION
Water tank capacity: 120 ml
Operating time: up to 8 hours in intermittent mode; 3.5 hours in continuous mode.
7 different colors of LED light (red, orange, yellow, green, fuchsia, blue, green)
Power: 12 W
Recommended area: from 10 to 30 m2
The device sprays a mixture of water and essential oils into millions of micro-particles in the form of a mist. Effects: purifies the air, humidifies and gives a subtle fragrance.
The device can be used in all kinds of rooms, locker rooms, offices, hotels, hospitals, beauty salons.
The set includes:
- Ultrasonic diffuser
- Power supply and cable to connect the device
- Operating instructions
- Water measure
Operating instructions:
- Insert the plug into the electrical outlet
- From this point on, do not move the device
- Add water to the tank using the measuring cup (120 ml)
- Add a few drops of essential oil
- Put on the lid
- Turn on the device
- One press of the left button starts the continuous mode; two - intermittent mode 30 s ON, 30 s OFF; three - continuous mode (steam for 1 hour); four - continuous mode (steam for 3 hours); five - turn off the device
- One press of the right button starts the lighting (alternating colors); two - constant colors; three - turn off the lighting
Essential oil formulas
1. Essential oil blends for calming and balancing emotions
Daily balance: 3 drops of geranium essential oil, 2 drops of lavender essential oil
Good mood: 3 drops of lavender essential oil, 3 drops of orange essential oil, 2 drops of grapefruit essential oil
2. Essential oil blends that have a cleansing effect
Clean air: 5 drops of lemon essential oil, 5 drops of tea tree essential oil, 1 drop of grapefruit essential oil
Energizing blend: 2 drops peppermint essential oil, 2 drops rosemary essential oil, 2 drops ginger essential oil
Spring cleanup: 5 drops lemon eucalyptus essential oil, 5 drops lemon essential oil, 1 drop scoop eucalyptus essential oil
3. Essential oil blends that have a relaxing effect
Sacred calm: 5 drops of lavender essential oil, 5 drops of chamomile essential oil
Calm night: 4 drops of bergamot essential oil, 4 drops of lavender essential oil, 2 drops of orange essential oil
4. Essential oil blends that have a stimulating effect: 4 drops lemon essential oil, 4 drops peppermint essential oil, 2 drops oregano essential oil
5. Romantic essential oil blends
Love is in the air: 1 drop patchouli essential oil, 1 drop cedar essential oil, 2 drops ylang ylang essential oil, 2 drops geranium essential oil
Cleaning the diffuser:
Before using a new type of essential oil, clean the device
- Unplug the diffuser from the power supply and remove the lid
- Pour out the residual water from the tank
- Wipe the tank with a soft, dry cloth
- Use a cotton swab and a few drops of rubbing alcohol to clean the ultrasonic plate
- Use a damp cloth to clean the outside of the unit
- Do not use detergents, solvents or abrasives
- Make sure water does not get into the fan
Troubleshooting:
Problem: No steam
Possible cause: Using the wrong kind of water, e.g. tap water with high mineral content.
Solution: Use distilled or purified water
Problem: No steam
Possible cause: No water in the water tank
Solution: Use distilled or purified water
Problem: No or improper steam
Possible cause: The device needs cleaning. Essential oils have stuck to the ultrasonic plate
Solution: Clean the device according to the instructions. Use clean water and clean the ultrasonic plate with a cotton swab with a few drops of alcohol
Problem: No or improper steam
Possible cause: The water level is higher than the maximum level
Solution: Clean the device and fill it halfway with water. Add more water when the unit starts producing steam. Remove excess water and restart the device
Problem: Blinking lights
Possible cause: Water level indicator is dirty
Solution: Clean the device according to the instructions. In particular, make sure that the ultrasonic plate is properly cleaned
Problem: The device does not stop even when the water tank is empty
Possible cause: Condensation has collected in the upper part of the housing
Solution: Tap lightly on the outer part of the housing to release the accumulated water
Problem: The device does not stop even when the water tank is empty
Possible cause: The water level indicator is dirty
Solution: Clean the device according to the instructions. In particular, make sure that the ultrasonic plate is properly cleaned
Problem: No diffusion. Unit sprays water
Possible cause: Water is too cold
Solution: Replace cold water with warm water
CAUTION
- Use only clean water at room temperature to fill the tank. Never use boiled or very cold water
- Do not move the device after filling it with water
- If you do not use the device for a long time, unplug it from the electrical outlet and pour the water out of the tank
- Never hold your hand over the ultrasonic plate when the device is on
- Never wrap the adapter in paper, plastic or other similar material, as this will prevent the adapter from dissipating heat optimally, which may eventually burn the diaphragm
- Never touch the adapter with wet hands
- Never use liquids other than water and a few drops of essential oil
- Never direct the vapor onto walls, ceiling or furniture
- Do not attempt to disassemble the device
- Never tilt, move, empty or refill the diffuser when it is on
- Do not fill the device with more liquid than indicated
- Clean the device regularly to prevent malfunctions
- Always place the device on a flat, stable and hard surface
RECOMMENDED STORAGE CONDITIONS
Keep out of reach of children and pets.